Being a personalised jewellery shop for a decade now, we know that getting the wrong size of your personalised bangle can be so frustrating sometimes that is why we always make sure that you get the correct bangle size.
It is also important that it can go in and out of your hands comfortably but not being too loose. Especially if the design is the same as our She Believe She Could Bangle which doesn't have an opening.
Here are some ways on how you can get your bangle measurement with the tools that are readily available within your home;
Get your Bangle Size ( For Bangles WITHOUT Opening)
STEP 1: Preparation
Prepare all the tools that you will need to measure and get your bangle size.
- Ruler
- A strip of Paper
- Pen to mark down the measurement
- Belle Fever Measurement Chart
- Scissor (Optional)
STEP 2: Wrap the Paper
Attach a tape at the end of the strip to secure the paper, wrap it around your hand as small as possible as if you are putting in a bangle, as shown in the photo. Then, mark the paper from where the ends meet.
*Adjust the tightness to make sure your hands will fit in the bangle when worn.
STEP 3: Mark the Paper and Get the Measurement
Mark the paper from where the ends meet. Adjust the tightness to make sure your hands will fit in the bangle when worn. Using a ruler, measure the strip of paper from 0 up to the end of the marking to get your bangle size.
Step 4: Getting the Measurement
Finally, refer to our measurement guide to get your bangle size based on the length of the bracelet. Select the closest size up and check the corresponding bangle in diameter (this is your bangle size).
We also have another type of bangle like our Promise Bangle that has an opening.
Get your Bangle Size (For Bangles WITH Opening)
STEP 1: Preparation
Prepare all the tools that you will need to measure and get your bangle size.
- Ruler
- A strip of Paper
- Pen to mark down the measurement
- Belle Fever Measurement Chart
- Scissor (Optional)
STEP 2: Wrap the Paper
STEP 3: Mark the Paper and Get the Measurement
Mark the paper from where the ends meet. Using a ruler, measure the strip of paper from 0 up to the end of the marking to get your bangle size.